Adam Audio A7V 7″ Active Nearfield Studio Monitor – Single

- 70 % Off

Original price was: $97,695.00.Current price is: $29,308.50.

Adam Audio A7V 7″ Active Nearfield Studio Monitor – Single

Add to wishlist
SKU: OQVRWAMCZS Category: Tags: , , , , , , , , , , , ,

Description

Adam Audio A7V 7″ Active Nearfield Studio Monitor  – Single Overview:

A New Industry StandardThe A7V is a contemporary 2-way monitor that represents the evolution of ADAM Audio’s award winning A7X. It features a 7” Multi-Layer Mineral woofer and rotatable X-ART tweeter, which is made by hand in Berlin.DSP-based voicing, equalization and room correction options can be controlled remotely and in real time via the free-to-download A Control software, and updatable firmware allows for new filters and tunings to be implemented over the lifetime of the monitor.Features

  • German Handmade Precision X-ART Tweeter with rotatable HPS waveguide
  • 7” Woofer (Multi-Layer Mineral)
  • Cumulated Amp. Power Peak: 130 W
  • Frequency Response @ -6 dB: 40 Hz – 45 kHz
  • Max. peak SPL per speaker at 1 m: 105 dB SPL

Specifications

  • Audio Input Connectors
    • Analog: XLR, RCA
    • Input Impedance: 9 kOhm / 3.3 kOhm
    • Max. Input Level: +19 dBu
  • Amplification
  • Woofer
    • Amplifier Type: PWM
    • Peak (10% THD, limiter deactivated): 110 W
    • RMS (1% THD, limiter deactivated): 90 W
  • Tweeter
    • Amplifier Type: Class A/B
    • Peak (10% THD, limiter deactivated): 20 W
    • RMS (1% THD, limiter deactivated): 15 W
  • Drivers
  • Woofer
    • Basket Diameter: 7″
    • Voice Coil Diameter: 1.3″ (33 mm)
    • Cone Material: MLM
  • Tweeter
    • Type: X-ART
    • Diaphragm Area: 4 inch² (2420 mm²)
    • Equivalent Diaphragm Diameter: 2″ (56 mm)
    • Velocity Transform Ratio: 4 to 1
    • Diaphragm Weight: 0.17 g
    • Waveguide: HPS (rotatable)
    • Waveguide Dispersion: 120° horizontal, 70° vertical
  • Control Options [via Network]
    • Networking Connector: RJ45
    • Connection Type: Ethernet
    • Communication Protocol: OCA using standard IP data
    • Control Software: A Control (Windows and MacOS available)
    • Room Adaption Options: Backplate, Extended, Sonarworks SoundID Reference integration
    • Advanced Room Adaptation: 6 x PEQ, Level, Delay
    • Third-party Calibration Compatibility: Import from Sonarworks SoundID Reference
  • Signal Processing
    • AD converter: 24-bit
    • Internal sample rate: 96 kHz
    • Delay range, resolution: 0 – 10 ms, 0.1 ms
    • Protection: Independent peak and thermo limiters for each driver, and amplifier thermo limiters
  • Acoustics
    • Frequency Response @ -3 dB: 44 Hz – 41 kHz
    • Frequency Response @ -6 dB: 40 Hz – 45 kHz
    • Max. peak SPL per speaker at 1 m (sine bursts): 105 dB SPL
    • Max. peak SPL per speaker at 1 m (IEC-weighted noise): 113 dB SPL
    • Crossover Frequencies: 2.8 kHz
  • Control Options [via Backplate]
    • Input Sensitivity: 0 dBu = 100 dB SPL at 1 m @ 0 dB level setting
    • Level: -12 dB to +12 dB
    • Input Selection: Balanced, unbalanced
    • Voicings: Pure, UNR
  • Room Adaption:
    • Bass: +2, 0, -2, -4 dB
    • Desk: 0, -2, -4 dB
    • Presence: +1, 0, -1 dB
    • Treble: +1.5, 0, -1.5 dB
  • General Data
    • Display: Front panel multi-colour LED
    • Cabinet Design: Dual front ported
    • Cabinet Material: Vinyl wrapped MDF and painted MDF front panel
    • Mounting options: Threaded inserts on the bottom of the cabinet (4 x M8)
    • Power consumption (max, idle, sleep): 220 W, 10 W, 3.5 W
    • AC Input Voltage: 100 – 240 V, 50/60 Hz
    • Power Rating: 300 W max.
    • Operating Conditions:-10° C to +40° C (+14° F to +104° F); <75 % RH, non-condensing
    • Weight: 8.7 kg (19 lb 3 oz)
    • Dimensions (Height x Width x Depth): 337 mm x 200 mm x 280 mm (13 1/4″ x 7 7/8″ x 11″)

Additional information

Type

Single

Related products

Adam Audio A7V 7" Active Nearfield Studio Monitor - Single

Add to cart